Leaf Resin Epoxy and Concrete Mold - Coaster - Code:178

Leaf Resin Epoxy Mold - Coaster - 18.6 x 17.2 cm

This Model is Suitable for Epoxy and Concrete Casting.

Resin epoxy silicone injection molds are heat-resistant and easy to release, meaning they can be removed after the product has dried. They are resin epoxy molds that can withstand high temperatures, typically between 200 and 300 degrees, creating a fast curing process for resin epoxy pours. Additionally, our silicone molds are reusable and not for one-time use. Resin epoxy molds can be used in various fields and can create differences in many sectors depending on your imagination. Currently, we have more than 600 resin epoxy mold models in Turkey.

Usage: Pour 2 parts resin and 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes by stirring from right to left, left to right, and bottom to top. During mixing, the mixing rod should touch the bottom and sides of the container to achieve a homogeneous mixture. Then, let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It becomes touchable in about 6 hours and completely hardens within 12 hours. It develops a scratch-resistant glass-like appearance in 48 hours. Color: Transparent

Product Code: GJ066

Important Warning:

• The general lifespan of the mold is 10 uses, while some of our models can be used up to 20-25 times.
• Proper care and usage methods, as well as cleaning procedures, can help you extend the lifespan of your mold.
• We recommend using mold release spray or wax varnish to maintain the mold's glossiness and ensure a longer lifespan.
• Non-alcohol-based wet wipes are the most effective for cleaning epoxy liquids and residues.
• Avoid cleaning silicone molds with alcohol or solvent-based products, and do not touch the mold with your fingers.