Sugar Bowl Resin Epoxy and Concrete Mold Code 118

Sugar Bowl Resin Epoxy and Concrete Mold -Code:118
4 x 7 x 8.5 cm
This Model is Suitable for Epoxy and Concrete Casting.

Resin epoxy silicone injection molds are heat-resistant and easy to release, meaning they can be removed after the product has dried in resin epoxy casting molds that require quick drying at high temperatures, typically between 200 to 300 degrees Celsius. Additionally, our silicone molds are reusable and not for one-time use only. Resin epoxy molds, which can be used in many areas, can create differences in many sectors depending on your imagination. Currently, we have more than 600 resin epoxy mold models in Turkey.

Usage: Pour 2 measures of resin to 1 measure of hardener into a container and mix slowly until no air bubbles remain. Stir thoroughly for 2-3 minutes from right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Then, let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It becomes touchable in about 6 hours and completely hardens within 12 hours. It takes on a scratch-resistant glass-like appearance within 48 hours. Color: Transparent

Product Code: GJ048

Important Notice:

• The general lifespan of molds is 10 uses, some of our models have a lifespan of 20-25 uses.
• Taking good care of your mold and following proper usage and cleaning procedures can help you use it for a longer period.
• We recommend using mold release spray or wax varnish to maintain mold glossiness and ensure a longer lifespan.
• Non-alcohol-based wet wipes are the most effective materials for cleaning epoxy residues.
• Avoid cleaning silicone molds with alcohol or solvent-based products and refrain from touching the mold with your fingers.