Wave Tray Epoxy Resin and Concrete Mold - Large - Code: 201

Wave Tray Epoxy Resin and Concrete Mold - Large - 201
30 x 17 cm

This Model is Suitable for Epoxy and Concrete Casting.

Epoxy resin silicone injection molds are heat resistant and easy to release, meaning they can be removed after the product has dried, and they are epoxy resin molds that can withstand high temperatures, typically between 200 and 300 degrees in a hot environment, which ensures rapid curing of resin epoxy pours. Additionally, our silicone molds are reusable and not for one-time use only resin molds. Resin epoxy molds that can be used in many areas can create differences in many sectors depending on your imagination. Currently, we have more than 180 resin epoxy mold models in Turkey.

Usage: 2 parts resin to 1 part hardener are poured into a container and slowly mixed until no air bubbles remain. Mix thoroughly for 2-3 minutes from right to left, left to right, and bottom to top. A homogeneous mixture should be ensured by touching the mixing stick to the bottom and sides of the container during mixing. Then, let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It becomes touchable in about 6 hours. It completely hardens within 12 hours. It acquires a scratch-resistant glass-like state in 48 hours. Color: Transparent

Product Code: GJ133

Important notice:

• The general lifespan of the mold is usually 10 times, while in some model molds, it is between 20-25 times.
• Taking good care of your mold and following proper usage and cleaning procedures can help you extend its lifespan.
• We recommend using mold release spray, as it preserves the mold's shine and ensures a longer lifespan.
• Non-alcohol-based wet wipes are the most effective material for cleaning epoxy liquids.
• Avoid cleaning silicone molds with alcohol or solvent-based products and make sure not to touch the mold with your fingers.