Resin Epoxy Necklace and Soap Mold -Code:53

Resin Epoxy Mold for Necklace - 4.5 x 8 x 1 cm

This Model is Suitable for Epoxy and Soap Casting.

Resin epoxy silicone injection molds are heat resistant and easy to demold, meaning they can be removed from the product after it dries. These molds can withstand high temperatures, typically between 200 to 300 degrees Celsius, which allows for quick drying of resin epoxy castings. Additionally, our silicone molds are reusable and not for one-time use only. Resin epoxy molds can be used in various fields and can create differences in many sectors based on your imagination. Currently, we have more than 600 resin epoxy mold models in Turkey.

Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes by stirring from right to left, left to right, and bottom to top. During mixing, the stirring stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touchable by hand after approximately 6 hours and completely hardened within 12 hours. It will have a scratch-resistant glass-like finish after 48 hours. Color: Transparent

Product Code: 003-d

Important Notice:

• The average lifespan of molds is generally 10 uses, while some of our mold models can be used between 20-25 times.
• Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
• We recommend using mold release spray or wax varnish to maintain the mold's shine and ensure a longer lifespan.
• When cleaning, non-alcohol-based wet wipes are the most effective for removing epoxy residues.
• Do not clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.