Necklace Resin Epoxy Mold - 227 - A1

Resin Epoxy Mold Necklace - 7cm

Resin epoxy silicone injection molds are heat resistant and easily removable, meaning they can be taken out after the product has dried. These molds can withstand high temperatures, around 200 to 300 degrees, which allows for quick drying of resin epoxy casts. Additionally, our silicone molds are reusable and not for one-time use. Depending on your imagination, resin epoxy molds can create variations in many sectors. Currently, we have more than 600 resin epoxy mold models available in Turkey.

Instructions: Pour 2 parts resin to 1 part hardener into a container and mix slowly until there are no air bubbles left. Mix thoroughly for 2-3 minutes by stirring from right to left, left to right, and bottom to top. During mixing, ensure that the mixing stick touches the bottom and edges of the container to create a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touchable in about 6 hours and completely hardened within 12 hours. After 48 hours, it will become scratch-resistant like glass. Color: Transparent

Product Code: 003-a1

Important Warning:

• The general lifespan of the mold is usually 10 uses, while some models can last between 20-25 uses.
• Proper care and usage methods, as well as cleanliness procedures, can help extend the lifespan of your mold.
• We recommend using mold release spray, as it maintains the mold's glossiness and ensures a longer lifespan.
• Non-alcohol-based wet wipes are the most effective for cleaning epoxy liquids and residues.
• Avoid cleaning silicone molds with alcohol or solvent-based products and refrain from touching the mold with your fingers.