Resin Epoxy Mold Pendant Keychain Star - A2

Epoxy Resin Mold Pendant Keychain Star - 55 mm

Epoxy resin silicone injection molds are heat-resistant and easy to remove, meaning they can be removed from the resin epoxy casts quickly after drying and can withstand high heat temperatures ranging from around 200 to 300 degrees in a hot environment, allowing for fast curing of the product. Our silicone molds are reusable and not for single-use only. Epoxy resin molds can be used in various fields and can create differences in many sectors depending on your imagination.

Usage: Pour 2 parts resin and 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 10-15 minutes by stirring from right to left, left to right, and bottom to top. Make sure to achieve a homogeneous mixture by touching the mixing stick to the bottom and sides of the container during mixing. Let the mixture rest for 5 minutes and then pour it into the mold to dry. It becomes touchable after about 6 hours and completely hardens within 24 hours. It reaches a glass-like state in 48 hours. Color: Transparent

Important notice:

The lifespan of the mold is generally 10 uses, while some of our model molds can be used up to 20-25 times. Taking good care of your mold, along with proper usage and cleaning procedures, can extend its lifespan. We recommend using mold release spray, which helps maintain mold glossiness and ensures a longer lifespan. Non-alcohol-based wet wipes are the most effective in cleaning epoxy liquids. Do not clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.