Bookmarker Resin Epoxy Mold Rabbit - Code: 151

Epoxy Resin Rabbit Bookmark Mold 9.3 x 2.6 cm

Epoxy resin silicone injection molds are heat resistant and easily removable, allowing the product to be removed after drying. They are resin epoxy molds that can withstand high temperatures, typically between 200 and 300 degrees Celsius, in a hot environment, facilitating the rapid curing of resin epoxy pours. Additionally, our silicone molds are reusable, not for one-time use. Resin epoxy molds can be used in many fields and can create variations in various sectors depending on your imagination. Currently, we have more than 180 resin epoxy mold models available in Turkey.

Instructions: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes from right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and sides of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It can be touched by hand after about 6 hours and fully hardens within 12 hours. It becomes scratch-resistant like glass within 48 hours. Color: Transparent

Product Code: GJ108-04

Important Warning:

• The general lifespan of the mold is usually 10 uses, but for some mold models, it can be between 20-25 uses.
• Taking good care of your mold and following proper usage and cleaning procedures can make it last longer.
• We recommend using mold release spray, which helps maintain the gloss of the mold and prolong its lifespan.
• Non-alcohol-based wet wipes are the most effective way to clean epoxy residues.
• Avoid cleaning silicone molds with alcohol or solvent-based products, and do not touch the mold with your fingers.