Resin Epoxy Mini Mechanism Mold - Code:83

Epoxy Resin Mini Mechanism Mold 10.5 x 1 cm

Epoxy resin silicone injection molds are heat-resistant and easy-to-release molds that can be removed after the product has dried, ensuring quick curing in resin epoxy casts with an average high heat degree of about 200 to 300 degrees Celsius. Additionally, our silicone molds are reusable and not for one-time use only. Resin epoxy molds, which can be used in many fields, can create differences in various sectors depending on your imagination. Currently, we have more than 180 resin epoxy mold models available in Turkey.

Directions: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes by stirring from right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and sides of the container to create a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touchable by hand after approximately 6 hours and completely hardened within 12 hours. It will achieve a scratch-resistant glass-like finish in 48 hours. Color: Transparent

Product Code: GJ112

Important Warning:

• The general lifespan of a mold is 10 uses, but some of our models can be used between 20-25 times.
• Proper care and usage methods, as well as cleaning procedures, can help prolong the lifespan of your mold.
• We recommend using mold release spray or wax varnish to maintain the shine of the mold and ensure a longer lifespan.
• Non-alcohol-based wet wipes are the most effective way to clean epoxy liquids and molds.
• Avoid cleaning silicone molds with alcohol or solvent-based products, and make sure not to touch the mold with your fingers.