Resin Epoxy Mechanism Mold - Code:111

Epoxy Resin Mold Mechanism 8.5 x 8 x 0.8 cm

Epoxy resin silicone injection molds are heat-resistant and easily removable, meaning they can be taken out after the product has dried, ensuring quick drying of epoxy resin pours in a hot environment maintaining a temperature of around 200 to 300 degrees Celsius. Also, our silicone molds are reusable and not for one-time use. Epoxy resin molds can be used in many fields and can create differences in various sectors depending on your imagination. Currently, we have more than 180 models of epoxy resin molds available in Turkey.

Usage: Pour 2 parts resin and 1 part hardener into a container and mix slowly until there are no air bubbles left. Stir the mixture thoroughly for 2-3 minutes from right to left, left to right, and from bottom to top. During mixing, the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Then, let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It becomes touchable in about 6 hours and completely hardens within 12 hours. After 48 hours, it becomes scratch-resistant and takes on a glass-like appearance. Color: Transparent

Product Code: GJ114

Important Warning:

• The general lifespan of the mold is usually 10 uses, while some model molds can be used up to 20-25 times.
• Proper care of your mold and the way you use it, including cleaning procedures, can help prolong its lifespan.
• We recommend using mold release spray or wax varnish to maintain the mold's shine and ensure long-term use.
• Non-alcohol-based wet wipes are the most effective way to clean epoxy liquids from silicone molds.
• Avoid cleaning silicone molds with alcohol or solvent-based products, and make sure not to touch the mold with your fingers.