Resin Epoxy Mold - Perforated Rectangle - E17

Epoxy Resin Mold-Holed Rectangular - 40 x 19.6 x 7 mm

Feature : DOMESTIC PRODUCTION - %100 brand new, food-grade epoxy silicone.

Non-stick, easy to separate, clean, eco-friendly, low, cardboard, recyclable.
Simple and practical, naturally antibacterial, high strength softness,
Not easily damaged, crack resistance extreme temperature -40 C-230 C (-40 F-446 F)
Safety, non-toxic, no odor, evenly heated.
Material: Silicone

Usage: Pour 2 parts resin to 1 part hardener into a container and slowly mix
until no air bubbles remain. Stir the mixture vigorously for 2-3 minutes
from right to left, left to right, and bottom to top. During mixing,
the mixing stick should touch the bottom and sides of the container to achieve a homogeneous mixture.
Then let the mixture rest for 5 minutes and pour it into the mold to dry.
It becomes touchable by hand in about 6 hours. It completely hardens within 12 hours.
It takes on a scratch-resistant glass-like appearance in 48 hours.

• Important warning:

  • The general service life of the mold is usually 10 times, but in some of our model molds, it is between 20-25 times.
  • Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
  • We recommend using mold release spray, which maintains mold glossiness and ensures long-term use.
  • Non-alcohol-based wet wipes are the most effective in cleaning epoxy liquids.
  • Avoid cleaning silicone molds with alcohol and solvent-based products, and be careful not to touch the mold with your fingers.