5 pieces of Roman Numeral 40 cm Clock - Hobby Silicone Mold

Our silicone molds are reusable and not for one-time use only. Resin epoxy molds that can be used in many areas can create differences in various sectors depending on your imagination.

Usage: Pour 2 parts resin to 1 part hardener in a container and mix slowly until there are no air bubbles left. Mix thoroughly from right to left, left to right, and bottom to top for 10 - 15 minutes. During mixing, the mixing stick should touch the bottom and sides of the container to create a homogeneous mixture. Allow the mixture to rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable after about 6 hours and completely hardens within 24 hours. It takes on a glass-like appearance in 48 hours.

Color: Transparent

• Important notice:

  • The general usage life of the mold is usually 10 times, while in some model molds it can be between 20-25 times.
  • Taking good care of your mold and following proper usage and cleaning procedures can help you extend its lifespan.
  • We recommend using mold release spray, as it maintains the mold's shine and prolongs its lifespan.
  • Non-alcohol-based wet wipes are the most effective material for cleaning epoxy liquids.
  • Avoid cleaning silicone molds with alcohol or solvent-based products and be careful not to touch the mold with your fingers.