7cm - 10-Piece Ridged Round Magnet Mold

• 7cm - Pack of 10 Toothed Round Magnet Mold

Round diameter: 7 cm

Depth: 5 mm

Dimensions may vary slightly.

• Resin epoxy silicone injection molds are heat-resistant and easy to release, meaning they can be removed after the product has dried. These resin epoxy molds can withstand high temperatures in a hot environment, typically between 200 and 300 degrees, ensuring quick drying of resin epoxy castings.

• Our silicone molds are reusable and not for one-time use. Resin epoxy molds can be used in many different fields, creating variations in many sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and slowly mix until no air bubbles remain. Mix thoroughly for 10-15 minutes in a back and forth, side to side, and bottom to top motion. The mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and leave it to dry. It will be touchable in about 6 hours and fully hardened within 24 hours. It will reach a glass-like state within 48 hours.

• Color: Transparent