Roman Numeral 40 cm Clock - Hobby Silicone Mold

Our silicone molds are reusable, not for one-time use resin molds. Resin epoxy molds can also be used in many fields, creating differences in various sectors depending on your imagination.

Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until there are no air bubbles left. Mix thoroughly from right to left, left to right, and bottom to top for 10 - 15 minutes. During mixing, the mixing stick should touch the bottom and sides of the container to achieve a homogeneous mixture.

Afterwards, let the mixture rest for 5 minutes, pour it into the mold, and leave it to dry. It will be touchable by hand after about 6 hours and completely hardened within 24 hours. It will achieve a glass-like state after 48 hours.

Color: Transparent

• Important warning:

  • The general lifespan of molds is usually around 10 uses, while some of our model molds can be used up to 20-25 times.
  • Taking good care of your mold and following proper usage and cleaning procedures can help extend its lifespan.
  • We recommend using mold release spray, which preserves mold shine and ensures longer usability.
  • Non-alcohol wet wipes are the most effective in cleaning epoxy residues.
  • Avoid cleaning silicone molds with alcohol or solvent-based products, and be careful not to touch the mold with your fingers.