Epoxy Resin Mold - Perforated Square - E6

Epoxy Resin Mold-Hollow Rectangle-29 x 7 mm

• Epoxy resin silicone injection molds are heat resistant and easily removable, meaning they can be removed from the resin epoxy casts after drying, and they can withstand high temperatures of around 200 to 300 degrees Celsius, ensuring rapid curing of resin epoxy pours in a hot environment.

• Our silicone molds are reusable and not for one-time use only. Resin epoxy molds can be used in many fields and can create variations in different sectors based on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and slowly mix until there are no air bubbles left. Mix thoroughly back and forth, left to right, and bottom to top for 10-15 minutes. The mixing rod should touch the bottom and edges of the container to ensure a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touchable after about 6 hours and fully hardened within 24 hours. It will take on a glass-like appearance in 48 hours.

• Color: Transparent

• • Important Warning:

    • The general lifespan of the mold is usually around 10 uses, but some of our model molds can last between 20-25 uses.
    • Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
    • We recommend using mold release spray, which preserves the mold's shine and prolongs its lifespan.
    • Non-alcohol-based wet wipes are the most effective in cleaning epoxy liquids.
    • Avoid cleaning silicone molds with alcohol or solvent-based products and do not touch the mold with your fingers.