Epoxy Resin Mold-Hollow Round- 35.5 x 7 mm
-
Epoxy resin silicone injection molds are heat-resistant and easy-to-release molds that can withstand high temperatures between approximately 200 to 300 degrees Celsius in a hot environment, allowing resin epoxy castings to dry quickly and be removed after drying.
-
Our silicone molds are reusable and not for one-time use only. Resin epoxy molds, which can be used in many different fields, can create differences in various sectors depending on your imagination.
-
Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Stir thoroughly for 10-15 minutes in a back and forth, left to right, and top to bottom motion. During mixing, the stirring rod should touch the bottom and sides of the container to ensure a homogeneous mixture.
Then, let the mixture rest for 5 minutes, pour it into the mold, and leave it to dry. It will become touchable by hand after approximately 6 hours and completely hardened within 24 hours. It will turn into a glass-like state in 48 hours. -
Color: Transparent
-
-
Important Warning:
- The general lifespan of the mold is usually around 10 uses, while some of our model molds can be used between 20-25 times.
- Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
- We recommend using mold release spray, as it maintains the mold's glossiness and prolongs its lifespan.
- Non-alcohol-based wet wipes are the most effective for cleaning epoxy residues.
- Avoid cleaning silicone molds with alcohol or solvent-based products, and be careful not to touch the mold with your fingers.
-
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@@COMMENT_TITLE@
@COMMENT_COMMENT@