Candle Crystal Epoxy Resin Mold - Code:498

Candle Crystal Epoxy Resin Mold

Resin epoxy silicone injection molds are heat resistant and easy to release, meaning they can be removed from the product after it dries. These resin epoxy molds help the resin epoxy pours to dry quickly, and can withstand temperatures between approximately 200 to 300 degrees Celsius in a hot environment. Additionally, our silicone molds are reusable, not for one-time use only. Resin epoxy molds, which can be used in many different fields, can create variations in many sectors depending on your imagination. Currently, we have more than 600 models of resin epoxy molds in Turkey.

Usage: Pour 2 parts resin and 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes, stirring from right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Then let the mixture rest for 5 minutes, pour it into the mold, and leave it to dry. It can be touched by hand after approximately 6 hours. It will fully harden within 12 hours and reach a scratch-resistant glass-like state in 48 hours.

Product Code:

Important Warning:

• The general lifespan of molds is 10 uses, but for some models, it can be between 20-25 uses.
• Taking good care of your mold and following proper cleaning procedures can help extend its lifespan.
• We recommend using mold release spray or wax varnish to maintain the mold's shine and ensure a longer lifespan.
• Non-alcohol-based wet wipes are the most effective for cleaning epoxy liquids and are recommended for cleaning.
• Avoid cleaning silicone molds with alcohol or solvent-based products and refrain from touching the mold with your fingers.