Round Necklace Resin Epoxy Mold - 2cm - Code: 98

Round Pendant Resin Epoxy Mold - 2 cm

Resin epoxy silicone injection molds are heat resistant and easily removable, meaning they can be removed after the product has dried, allowing for quick curing of resin epoxy pours at high temperatures, typically between 200 and 300 degrees in a hot environment. Our silicone molds are also reusable, not for one-time use only. Resin epoxy molds can be used in many different fields, creating variations in several sectors depending on your imagination. Currently, we have over 600 resin epoxy mold models available in Turkey.

Instructions: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes from right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and edges of the container to ensure a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable after about 6 hours and completely hardens within 12 hours. It takes on a scratch-resistant glass-like appearance in 48 hours. Color: Transparent

Product Code: GJ074-20mm

Important Note:

• The general lifespan of a mold is usually 10 uses, while some of our mold models can be used up to 20-25 times.
• Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
• We recommend using mold release spray or wax varnish to maintain mold shine and ensure long-term use.
• Non-alcohol-based wet wipes are the most effective material for cleaning epoxy liquids.
• Absolutely do not clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.