Resin Epoxy Mold for Droplet Jewelry - Code: 79

Resin Epoxy Mold for Droplet Jewelry - 5.5 x 3.5 x 1.7 cm

Epoxy resin silicone injection molds are heat-resistant and easy to release, meaning they can be removed from the product after it has dried, thus ensuring fast drying of resin epoxy casts in a hot environment with a high temperature range of approximately 200 to 300 degrees Celsius. Additionally, our silicone molds are reusable and not for one-time use. Resin epoxy molds can be used in various fields and can create differences in many industries depending on your imagination. Currently, we have more than 600 resin epoxy mold models in Turkey.

Usage: Pour 2 measures of resin and 1 measure of hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes from right to left, left to right, and bottom to top. Homogeneous mixing should be ensured by touching the mixing stick to the bottom and sides of the container during mixing. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touchable by hand after about 6 hours and completely hardened within 12 hours. It will achieve a scratch-resistant glass-like state in 48 hours. Color: Transparent

Product Code: GJ040

Important notice:

• The general lifespan of the mold is 10 uses, but some models can last between 20-25 uses.
• Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
• We recommend using mold release spray, as it maintains the mold's shine and ensures a longer lifespan.
• Non-alcohol-based wet wipes are the most effective for cleaning epoxy residues.
• Avoid cleaning silicone molds with alcohol or solvent-based products and refrain from touching the mold with your fingers.