Resin Epoxy Multi Pendant Mold - Code: 184

Epoxy Resin Multi Pendant Mold - 23.5 x 11.5 x 1 cm

Epoxy resin silicone injection molds are heat resistant and easy to release, meaning they can be removed after the product has dried. They are resin molds that can withstand high temperatures, typically between 200 and 300 degrees Celsius, which ensures rapid curing of resin epoxy casts in a hot environment. Additionally, our silicone molds are reusable, not for one-time use. Epoxy resin molds can be used in many different fields and can create variations in various industries depending on your imagination. Currently, we have more than 600 epoxy resin mold models available in Turkey.

Instructions: Pour 2 parts resin to 1 part hardener into a container and stir slowly until no air bubbles remain. Mix thoroughly by stirring from right to left, left to right, and bottom to top for 2-3 minutes. During mixing, the mixing stick should touch the bottom and sides of the container to create a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will become touchable after about 6 hours and completely hardened within 12 hours. It will have a scratch-resistant glass-like finish in 48 hours. Color: Transparent

Product Code: GJ010

Important warning:

• The general lifespan of a mold is usually 10 uses, but some of our models can be used up to 20-25 times.
• Taking good care of your mold and following proper cleaning procedures can extend its lifespan.
• We recommend using mold release spray or wax varnish to maintain the mold's shine and ensure a longer lifespan.
• Non-alcohol-based wet wipes are the most effective way to clean epoxy liquids from silicone molds.
• Avoid cleaning silicone molds with alcohol or solvent-based products and refrain from touching the mold with your fingers.