Epoxy resin multi silicone jewelry mold - 221

Epoxy Resin Mold Multi Mold - 16.2 x 25.7 cm

Epoxy resin silicone injection molds are heat-resistant and easy-to-release molds that allow quick curing of resin epoxy pours, capable of withstanding high temperatures ranging from approximately 200 to 300 degrees Celsius in a hot environment after the product has dried. Additionally, our silicone molds are reusable and not one-time use resin molds. Epoxy resin molds can be used in many fields and can create differences in various sectors depending on your imagination.

Usage: Epoxy resin is poured into a container and slowly stirred until no air bubbles remain. During stirring, mix from right to left, left to right, and bottom to top for about 2-3 minutes. The mixing stick should touch the bottom and sides of the container to provide a homogeneous mixture. Then, let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It becomes touchable after about 6 hours and completely hardens within 12 hours. It takes 48 hours to achieve a scratch-resistant glass-like finish.

Color: Transparent

• Important Note:

  • Taking good care of your mold and following proper usage and cleaning procedures can help extend its lifespan.
  • Non-alcohol-based wet wipes are the most effective material for cleaning epoxy liquids.
  • Avoid cleaning silicone molds with alcohol or solvent-based products and refrain from touching the mold with your fingers.