Square Ashtray Resin Epoxy and Concrete Mold - Code: 961

Mold Size: 10.5cm
Inner Diameter 6.7 cm

Mold Weight: 100g

Epoxy resin silicone injection molds are heat-resistant and easy-to-release molds that can be removed after the product has dried, ensuring fast curing in resin epoxy casts, with a high heat resistance of approximately 200 to 300 degrees in a hot environment. Our silicone molds are reusable, not for one-time use. Our resin epoxy molds, which can be used in many areas, can create differences in many sectors depending on your imagination. Currently, we have more than 600 resin epoxy mold models in Turkey.

Usage: Mix 2 parts resin with 1 part Freezer into a freezer-safe container, stirring slowly until no air bubbles remain. Stir the mixture from right to left, left to right, and from bottom to top for 2-3 minutes. A homogeneous mixture should be achieved by touching the mixing stick to the bottom and sides of the container during mixing. Then, let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It will be touchable after about 6 hours and completely dry within 12 hours. It will have a scratch-resistant glass-like appearance within 48 hours. Color: Transparent

Product Code: GJ083

Important Warning:

• • • Mold usage life is generally 10, but in some models, it can be between 20-25.
    • Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
    • We recommend using mold release spray or wax varnish, as they maintain the mold's glossiness and ensure a longer lifespan.
    • Non-alcohol-based wet wipes are the most effective in cleaning epoxy liquids.
    • Do not clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.