Cat & Bone -Hello Kitty Resin Epoxy Mold- H4

Hello Kitty Resin Epoxy Mold - Small Size 

• Epoxy resin silicone injection molds are heat-resistant and easy-to-release molds, meaning they can be removed after the product has dried, allowing for quick curing of resin epoxy casts in a high-temperature environment ranging from approximately 200 to 300 degrees Celsius.

• Our silicone molds are reusable and not for one-time use only. Resin epoxy molds can be used in many different areas and can create variations in various sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Stir the mixture thoroughly for 10-15 minutes in a back and forth, side to side, and bottom to top motion. During stirring, the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Then let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It will become touchable in about 6 hours and completely hardened within 24 hours. It will reach a glass-like state in 48 hours.

• Color: Transparent 

• • Important Note:

    • The general lifespan of molds is around 10 uses, while some of our model molds can be used 20-25 times.
    • Taking good care of your mold and following proper usage and cleaning procedures can help prolong its lifespan.
    • We recommend using mold release spray, as it preserves the mold's shine and ensures a longer lifespan.
    • Non-alcohol based wet wipes are the most effective in cleaning epoxy residues.
    • Avoid cleaning silicone molds with alcohol or solvent-based products, and do not touch the mold with your fingers.