Spiral Necklace Resin Epoxy Mold - Code:158

Coil Necklace Jewelry Resin Epoxy Mold - 1.6 x 1.9 x 4.9 cm

Resin Epoxy silicone injection molds are heat resistant and easy to detach, allowing for quick drying of resin epoxy casts that can be removed after the product has dried, withstanding a high temperature range of approximately 200 to 300 degrees Celsius in a hot environment. Additionally, our silicone molds are reusable, not for one-time use only. Resin epoxy molds can be used in various fields and can create differences in many sectors depending on your imagination. Currently, we have more than 600 resin epoxy mold models in Turkey.

Instructions: Mix 2 parts resin with 1 part hardener in a container, stirring slowly until no air bubbles remain. Mix from right to left, left to right, and bottom to top for 2-3 minutes. During mixing, the mixing stick should touch the bottom and sides of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour into the mold and let it dry. It will be touchable after about 6 hours and completely hardens within 12 hours. It will have a scratch-resistant glass-like appearance after 48 hours. Color: Transparent

Product Code: GJ088

Important Notice:

• The general lifespan of a mold is 10 uses, while some of our mold models can be used between 20-25 times.
• Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
• We recommend using mold release spray or wax varnish to maintain mold glossiness and ensure a longer lifespan.
• Non-alcohol-based wet wipes are the most effective in cleaning epoxy residues.
• Avoid cleaning silicone molds with alcohol or solvent-based products, and refrain from touching the mold with your fingers.