Rectangle Tray Mold - Epoxy Resin Mold - T12

Tray Mold - Epoxy Resin Mold - T12 - 30x21 cm

Epoxy resin silicone injection molds are heat resistant and easy to release, meaning they can be removed after the product has dried. They are resin epoxy molds that can maintain a high temperature environment between an average of 200 to 300 degrees, allowing for quick curing of resin epoxy pours. Additionally, our silicone molds are reusable and not for one-time use. Resin epoxy molds can be used in many different fields and can create variations in many industries depending on your imagination. In Turkey

Usage: Pour 2 parts of resin to 1 part of hardener in a container and slowly mix until there are no air bubbles left. Mix thoroughly from right to left, left to right, and bottom to top for 10 - 15 minutes. During mixing, the mixing stick should touch the bottom and sides of the container to create a homogeneous mixture. Then let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It will become touchable with your hand after approximately 6 hours. It will completely harden within 24 hours and turn into glass after 48 hours. Color: Transparent

• Important warning:

  • The general lifespan of molds is usually 10, but for some models, it can be between 20-25.
  • Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
  • We recommend using mold release spray or wax varnish to maintain mold glossiness and ensure a longer lifespan.
  • Non-alcohol-based wet wipes are the most effective for cleaning epoxy liquids.
  • Do not clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.