Epoxy Silicone Mold - Large Flower - Code:278

Epoxy Silicone Mold - Large Flower - 38.8*34.3*1.1 cm

Resin epoxy silicone injection molds are heat resistant and easy to release, meaning they can be removed after the product has dried. They are resin epoxy molds that can withstand high temperatures, typically between 200 and 300 degrees Celsius, creating a fast curing process for resin epoxy casts. Additionally, our silicone molds are reusable and not for one-time use only. Resin epoxy molds can be used in many different fields, allowing for versatility and creativity in various industries. Currently, we have more than 180 resin epoxy mold models available in Turkey.

Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes by stirring from right to left, left to right, and bottom to top. During mixing, ensure the mixing stick touches the bottom and sides of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touchable after approximately 6 hours and completely hardened within 12 hours. In 48 hours, it will have a scratch-resistant glass-like finish. Color: Transparent

• Important note:

  • The general usage life of molds is usually around 10 times, while some of our mold models can be used 20-25 times.
  • Taking good care of your mold and following proper usage and cleaning procedures can help prolong its lifespan.
  • We recommend using mold release spray or wax varnish to maintain the mold's shine and ensure a longer lifespan.
  • Non-alcohol-based wet wipes are effective for cleaning epoxy residues.
  • Avoid cleaning silicone molds with alcohol or solvent-based products, and do not touch the mold with your fingers.