Square Mold - Resin Epoxy Mold - CB1

Square Mold - Epoxy Resin Mold - 11 x 11 CM (MEASUREMENT ONLY VALID FOR ONE SQUARE)

• Epoxy resin silicone injection molds are heat-resistant and easy-to-release molds, meaning they can be removed from the resin epoxy casts after drying. These molds can withstand high temperatures, typically between 200 to 300 degrees, creating a fast-drying environment for resin epoxy casts.

• Our silicone molds are reusable and not for one-time use only. Resin epoxy molds can be used in many areas and can create variations in various sectors depending on your imagination.

• Usage: Pour 2 parts resin and 1 part hardener into a container and mix slowly until there are no air bubbles left. Mix thoroughly for 10-15 minutes from right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and edges of the container to ensure a homogeneous mixture. Then let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It will become touchable after about 6 hours and completely hardened within 24 hours. It will turn into a glass-like state in 48 hours.

• Color: Transparent

• • Important warning:

    • The general lifespan of the mold is 10 uses, while some of our model molds can last between 20-25 uses.
    • Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
    • We recommend using mold release spray, as it maintains the mold's shine and ensures long-term use.
    • Non-alcohol-based wet wipes are the most effective in cleaning epoxy liquids.
    • Avoid cleaning silicone molds with alcohol or solvent-based products and refrain from touching the mold with your fingers.