Resin Epoxy Concrete Button Silicone Mold - Code:109

Epoxy Resin, Soap, and Concrete Button Silicone Mold - Code: 109

8.9 x 7.8 cm

This Model is Suitable for Epoxy Resin, Soap, and Concrete Casting.

Epoxy resin silicone injection molds are heat resistant and easy to release, allowing for quick drying of epoxy resin casts that can be removed after drying in a hot environment with an average temperature of 200 to 300 degrees Celsius. Our silicone molds are reusable and not for one-time use only. Depending on your imagination, epoxy resin molds can create differences in many sectors. Currently, we have more than 180 epoxy resin mold models in Turkey.

Usage: Pour 2 parts resin to 1 part hardener into a container and slowly mix until no air bubbles remain. Mix thoroughly for 2-3 minutes by stirring from right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable by hand after about 6 hours and completely hardens within 12 hours. It takes on a scratch-resistant glass-like appearance in 48 hours. Color: Transparent

Product Code: GJ123

Important notice:

• The general lifespan of the mold is around 10 uses, but some models can last between 20-25 uses.
• Taking good care of your mold and following proper usage and cleaning procedures can help extend its lifespan.
• We recommend using mold release spray or wax varnish to maintain mold shine and ensure a longer lifespan.
• Non-alcohol-based wet wipes are the most effective for cleaning epoxy residues.
• Do not clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.