Resin Epoxy Silicone Mold 20x13x3 cm

Epoxy Resin Silicone Soap Mold

Product Dimensions: 20x13x3 cm

Resin epoxy silicone injection molds are heat resistant and easy to release, allowing resin epoxy casts to be quickly dried and removed at an average temperature of 200 to 300 degrees Celsius, creating a hot environment that can be sustained. Our silicone molds can be used multiple times and are not for one-time use only. Our resin epoxy molds can create differences in various sectors depending on your imagination. Currently, we have over 600 resin epoxy mold models in Turkey.

Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes from right to left, left to right, and bottom to top. During mixing, ensure a homogeneous mixture is obtained by touching the bottom and sides of the container with the mixing stick. Let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It becomes touchable after about 6 hours and completely hardens within 12 hours. It achieves a scratch-resistant glass-like finish in 48 hours. Color: Transparent

Important note:

Generally, mold lifespan is 10 uses, while some of our models can be used up to 20-25 times. Proper care and usage methods, as well as cleaning procedures, can extend the lifespan of your mold. We recommend using mold release spray or wax to maintain mold glossiness and ensure a longer lifespan. Non-alcohol-based wet wipes are the most effective in cleaning epoxy liquids. Never clean silicone molds with alcohol or solvent-based products, and avoid touching the mold interior with your fingers.