6cm - Set of 10 Flower Shaped Magnet Molds

• 6cm - Set of 10 Flower Model Magnet Mold

Diameter: 6 cm

Depth: 5 mm

Dimensions may slightly vary.

• Resin epoxy silicone injection molds are heat-resistant and easy-to-release molds, which can withstand high temperatures ranging from approximately 200 to 300 degrees Celsius in a hot environment, allowing rapid curing of resin epoxy castings that can be easily removed after the product has dried.

• Our silicone molds are reusable molds that can be used multiple times and are not for single-use resin molds. Resin epoxy molds can be used in various fields and can create differences in many sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and slowly mix until no air bubbles remain. Mix thoroughly for 10 - 15 minutes in a back and forth, left to right, and bottom to top motion. The mixing rod should touch the bottom and sides of the container to ensure a homogeneous mixture. Allow the mixture to rest for 5 minutes, then pour it into the mold and let it dry. It will become touchable in about 6 hours and completely harden within 24 hours. It will reach a glass-like state within 48 hours.

• Color: Transparent