5 Pieces 30 cm Round Tray - Hobby Silicone Mold SN36 - Code:

Our silicone molds are reusable and not for one-time use only. Resin epoxy molds that can be used in many areas can create differences in various sectors depending on your imagination.

Usage: Pour 2 parts resin to 1 part hardener into a container and slowly mix until no air bubbles remain. Stir thoroughly for 10 - 15 minutes in a right to left, left to right, and bottom to top motion. During mixing, the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture.
Then let the mixture sit for 5 minutes, pour it into the mold, and let it dry. It becomes touchable by hand after about 6 hours. It completely solidifies within 24 hours. It becomes glass-like in 48 hours.

Color: Transparent

• Important Warning:

  • The general lifespan of the mold is usually 10 uses, while for some model molds, it can be between 20-25 uses.
  • Taking good care of your mold and following proper usage and cleaning procedures can help prolong its lifespan.
  • We recommend using mold release spray, which maintains mold glossiness and prolongs its lifespan.
  • Non-alcohol-based wet wipes are the most effective material for cleaning epoxy liquids.
  • Avoid cleaning silicone molds with alcohol or solvent-based products and make sure not to touch the mold with your fingers.