5 pieces of 20x30 cm - Rectangular Tray Mold

• 5 Pieces 20x30 cm - Rectangular Tray Mold

Mold diameter: 20x30 cm

Depth: 8 mm

Small Variations May Occur in Measurements.

• Resin epoxy silicone injection molds are heat resistant and easy to demold, meaning they can be removed from the resin epoxy casts after they have dried. They are resin epoxy molds that can withstand high temperatures between approximately 200 to 300 degrees Celsius, enabling quick curing in resin epoxy casts.

• Our silicone molds are reusable and not for one-time use. Resin epoxy molds can be used in many fields and can create differences in various sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container, and mix slowly until no air bubbles remain. Mix thoroughly by stirring from right to left, left to right, and bottom to top for 10-15 minutes. During mixing, the stirring stick should touch the bottom and sides of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will become touchable after approximately 6 hours and completely hardened within 24 hours. It will reach a glass-like state in 48 hours.

• Color: Transparent