5 pieces of 28x18 cm - Rectangular Tray Mold

• 5 Pieces 28x18 cm - Rectangular Tray Mold

Mold diameter: 28x18 cm

Depth: 1 cm

There Might Be Slight Variations in Dimensions.

• Resin epoxy silicone injection molds are heat-resistant and easy to release, meaning they can be removed after the product has dried. They are resin epoxy molds that can withstand high temperatures, approximately between 200 to 300 degrees Celsius, in a hot environment, facilitating the rapid drying of resin epoxy pours.

• Our silicone molds are reusable and not for one-time use only. Resin epoxy molds can be used in many different fields and industries, depending on your imagination, creating variations in many sectors.

• Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Stir the mixture thoroughly for 10 - 15 minutes in a back and forth, left to right, and bottom to top motion. During stirring, ensure a homogeneous mixture by touching the bottom and sides of the container with the mixing stick. Then let the mixture rest for 5 minutes, pour it into the mold, and leave it to dry. It becomes touchable after about 6 hours and completely hardens within 24 hours. It reaches a glass-like state within 48 hours.

• Color: Transparent