5 pieces 15.7cm x 3.5cm - Double Feather Craft Silicone Mold

• 5 Pieces 15.7cm x 3.5cm - Double Feather Hobby Silicone Mold

Feather size: 15.7x3.5 cm

Depth: 3 mm

There May Be Slight Variations in Dimensions.

• Resin epoxy silicone injection molds are heat-resistant and easy to release, meaning they can be removed from resin epoxy casts after they have dried. These molds can withstand high temperatures, typically between 200 and 300 degrees Celsius, in a hot environment.

• Our silicone molds are reusable and not for one-time use. Resin epoxy molds can be used in many different areas and can create variations in many sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Stir thoroughly for 10-15 minutes, alternating stirring directions. During mixing, ensure a homogeneous mixture by touching the bottom and sides of the container with the stirring stick. Allow the mixture to rest for 5 minutes, then pour it into the mold and let it dry. It can be touched by hand after approximately 6 hours and will fully harden within 24 hours. It will reach a glass-like state in 48 hours.

• Color: Transparent