5 Pieces - Sea Horse - Epoxy Resin - Concrete Silicone Mold SN35 - Code:
- 5 Pieces - Sea Horse - Hobby Silicone Mold- Code:
- Measurements:
- Height: 43 cm
- Width: 20 cm
- 8mm in depth
- Epoxy resin silicone injection molds are heat resistant and easily removable, meaning they can be taken out after the resin epoxy castings have dried, enabling quick drying at a high temperature range of approximately 200 to 300 degrees in a hot environment, preserving the resin epoxy mold.
-
Our silicone molds are reusable, not for one-time use resin molds. Resin epoxy molds can be used in many fields and can create differences in many sectors depending on your imagination.
-
Usage: Pour 2 parts resin and 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly from right to left, left to right, and bottom to top for 10 - 15 minutes. During mixing, the mixing stick should touch the bottom and sides of the container to create a homogeneous mixture.
Then, let the mixture rest for 5 minutes, pour it into the mold, and let it dry.
After about 6 hours, it can be touched by hand. It fully hardens within 24 hours.
It reaches a glass-like state in 48 hours. -
Color: Transparent
-
Important notice:
- The general lifespan of the mold is 10 uses, while some of our model molds have a lifespan of 20-25 uses.
- Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
- We recommend using mold release spray, which preserves the glossiness of the mold and ensures a longer lifespan.
- Non-alcohol-based wet wipes are the most effective in cleaning epoxy residues.
- Do not clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.
-
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@@COMMENT_TITLE@
@COMMENT_COMMENT@