5 pieces of 4-cup Coaster - Hobby Silicone Mold - Code:

Our silicone molds are reusable and not for one-time use. These resin epoxy molds can be used in many different fields, allowing for creativity and innovation based on your imagination.

Usage: Pour 2 parts resin to 1 part hardener in a container and mix slowly until no air bubbles remain. Mix thoroughly for 10 - 15 minutes in a back and forth, side to side, and up and down motion. The mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture is achieved. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will become touchable after approximately 6 hours and fully hardened within 24 hours. It will reach a glass-like state in 48 hours.

Color: Transparent

• Important note:

  • The general lifespan of the mold is about 10 uses, while some of our models can last between 20-25 uses.
  • Taking good care of your mold and following proper cleaning procedures can extend its lifespan.
  • We recommend using mold release spray, as it maintains the shine of the mold and prolongs its lifespan. Non-alcohol-based wet wipes are the most effective in cleaning epoxy liquids.
  • Avoid cleaning silicone molds with alcohol or solvent-based products and refrain from touching the mold with your fingers.