Single Letter Epoxy Resin Mold - H

Single Letter Epoxy Resin Mold - H

4.5 cm Height - 1 cm Depth

Epoxy resin silicone injection molds are heat resistant and easily removable molds that can withstand high temperatures, typically between 200 and 300 degrees Celsius, ensuring quick drying of resin epoxy casts that can be removed after the product has dried. Our silicone molds are reusable and not for one-time use. Resin epoxy molds can be used in many different fields, creating variations depending on your imagination. Currently, we have more than 180 resin epoxy mold models available in Turkey.

Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes by stirring from right to left, left to right, and from bottom to top. During mixing, the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will become touchable in about 6 hours and completely hardened within 12 hours. After 48 hours, it will have a scratch-resistant glass-like finish.

Color: Transparent

• Important Note:

  • The general lifespan of the mold is around 10 uses, but some of our mold models can last between 20-25 uses.
  • Taking good care of your mold and following proper usage and cleaning procedures can help prolong its lifespan.
  • We recommend using mold release spray, as it maintains the mold's glossiness and ensures a longer lifespan.
  • Non-alcohol-based wet wipes are the most effective in cleaning epoxy liquids and residues.
  • Avoid cleaning silicone molds with alcohol or solvent-based products, and be careful not to touch the mold with your fingers.