Triangle Ripple Silicone Candle Mold - Code: 507

Triangle Wavy Silicone Candle Mold - Code: 507

Mold Size:

100 mm 36 g

Resin epoxy silicone injection molds are heat-resistant and easily removable, meaning they can be removed from the product after it has dried. These resin epoxy molds can withstand high temperatures, typically between 200 to 300 degrees, in a hot environment, enabling quick drying of resin epoxy pours. Our silicone molds are reusable and not for one-time use only. With over 600 models of resin epoxy molds currently available in Turkey, these molds can bring variations in many sectors, depending on your imagination.

Usage: Pour 2 parts resin and 1 part hardener into a container and mix slowly until no air bubbles remain. Stir the mixture thoroughly for 2-3 minutes, alternating directions from right to left and top to bottom. The mixing stick should create a homogeneous mixture touching the bottom and sides of the container. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touchable after approximately 6 hours and fully hardened within 12 hours. It will achieve a scratch-resistant glass-like finish in 48 hours.

Product Code:

Important Warning:

• The general lifespan of molds is around 10 uses, while some models can be used between 20-25 times.
• Taking good care of your mold and following proper usage and cleaning procedures can help prolong its lifespan.
• We recommend using mold release spray or wax varnish to maintain the mold's shine and ensure long-term use.
• Non-alcohol-based wet wipes are the most effective for removing epoxy residues during cleaning.
• Do not clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.