Rectangle Hollow Concrete Planter Mold - Hobby Silicone Mold -Code:510

• Hollow Concrete Rectangular Planter Mold

Mold Size: 12x15.5x3 cm

105.2 grams

There may be slight differences in dimensions.

Resin epoxy silicone injection molds are heat-resistant and easy-to-release molds that can withstand high temperatures of approximately 200 to 300 degrees Celsius, allowing for quick drying of resin epoxy casts and easy removal of the product after drying.

• Our silicone molds are reusable and not for one-time use. Resin epoxy molds can be used in various fields and can create differences in many sectors depending on your imagination.

• Usage: Pour 2 parts resin into a freezer-safe container for every 1 part hardener and mix slowly until no air bubbles remain. Stir thoroughly for 10-15 minutes in a back-and-forth, side-to-side, and up-and-down motion. The mixing stick should create a homogeneous mixture touching the bottom and sides of the container. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touch dry in about 6 hours, fully cured within 24 hours, and achieve a glass-like finish in 48 hours.

• Color: Transparent