Hollow Concrete Planter Mold - Hobby Silicone Mold - Code: 519

• Hollow Concrete Pot Mold

Size of the Mold: 15.2x15x3 cm

97.8 Grams

There May Be Slight Variations in Measurements.

• Resin epoxy silicone injection molds are heat-resistant and easily removable molds that can be used for resin epoxy casts, which can be removed after the product has dried, and can withstand high temperatures between approximately 200 to 300 degrees Celsius in a hot environment, allowing for quick drying of resin epoxy casts.

• Our silicone molds are reusable, not for one-time use resin molds. Resin epoxy molds can be used in many fields and can create variations in many industries depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles are left. Mix thoroughly for 10 - 15 minutes, stirring from right to left, left to right, and bottom to top. During mixing, the mixing rod should touch the bottom and sides of the container to achieve a homogeneous mixture. Allow the mixture to rest for 5 minutes, then pour it into the mold and let it dry. It can be touched by hand after about 6 hours and will fully harden within 24 hours. It will become glass-like in 48 hours.

• Color: Transparent