Round Necklace Resin Epoxy Mold - 3cm - Code: 93

Round Pendant Resin Epoxy Mold - 3 cm

Resin epoxy silicone injection molds are heat-resistant and easy-to-remove molds that can withstand high temperatures, typically between 200 and 300 degrees Celsius, ensuring rapid curing of resin epoxy castings that can be removed after the product has dried. Our silicone molds are reusable and not disposable resin molds. Resin epoxy molds can be used in many different fields, creating variations in different sectors depending on your imagination. Currently, we have more than 600 resin epoxy mold models in Turkey.

Instructions: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Stir the mixture from right to left, left to right, and bottom to top for 2-3 minutes. The mixing stick should create a homogeneous mixture touching the bottom and sides of the container. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touchable after about 6 hours and completely hardened within 12 hours. It will have a scratch-resistant glass-like finish in 48 hours. Color: Transparent

Product Code: GJ074-30mm

Important Warning:

• The general lifespan of the mold is usually 10 uses, while for some mold models it can be between 20-25 uses.
• Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
• We recommend using mold release spray or wax varnish to maintain mold shine and ensure a longer lifespan.
• Non-alcohol-based wet wipes are the most effective in cleaning epoxy liquids.
• Avoid cleaning silicone molds with alcohol or solvent-based products and do not touch the mold with your fingers.