Hexagon Pendant Jewelry Resin Epoxy Mold - Code:147

Hexagon Pendant Jewelry Resin Epoxy Mold -

Mold Size : 1.6 x 4.9 cm

Mold Weight: 5 g

Resin epoxy silicone injection molds are heat resistant and easy to release, meaning they can be removed after the product has dried. They are resin epoxy molds that can withstand high temperatures, around 200 to 300 degrees, allowing for quick curing of resin epoxy casts in a warm environment. Additionally, our silicone molds are reusable and not for single-use resin molds. Resin epoxy molds can be used in many fields and can create differences in various sectors depending on your imagination. Currently, we have more than 600 resin epoxy mold models in Turkey.

Usage: Pour 2 parts resin to 1 part hardener into a freezer-safe container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes from right to left, left to right, and bottom to top. Homogeneous mixing should be achieved by touching the mixing stick to the bottom and sides of the container during mixing. Let the mixture rest for 5 minutes, then pour it into the mold and allow it to dry. It becomes touchable after about 6 hours and fully cures within 12 hours, reaching a scratch-resistant glass-like state in 48 hours. Color: Transparent

Product Code: GJ083

Important note:

• The general lifespan of the mold is usually 10 uses, but some of our mold models can last between 20-25 uses.
• By taking good care of your mold and following proper cleaning procedures, you can extend its lifespan.
• We recommend using mold release spray or wax varnish to maintain mold glossiness and ensure long-term use.
• Non-alcohol-based wet wipes are the most effective for cleaning epoxy liquids and residues.
• Avoid cleaning silicone molds with alcohol or solvent-based products, and do not touch the mold with your fingers.