4-Piece Fatman's Hand - Hobby Silicone Mold - Code: SN1227

Our silicone molds are reusable and not for single use resin molds. Resin epoxy molds can be used in many fields and can create differences in many sectors depending on your imagination.

Usage: Pour 2 parts resin to 1 part hardener into a container and slowly mix until no air bubbles remain. Mix thoroughly for 10-15 minutes in a back-and-forth, left-to-right, and bottom-to-top manner. A homogeneous mixture should be provided by touching the mixing stick to the bottom and sides of the container during mixing. Then, let the mixture rest for 5 minutes and pour it into the mold to dry. It can be touched by hand after about 6 hours. It completely hardens within 24 hours. It reaches a glass-like state in 48 hours.

Color: Transparent

• Important warning:

  • The general service life of the mold is usually 10 times, and in some model molds, it is between 20-25 times.
  • By taking good care of your mold and following proper usage and cleaning procedures, you can extend its service life.
  • We recommend using mold release spray, as it preserves the mold's glossiness and ensures long service life.
  • Non-alcohol-based wet wipes are the most effective in cleaning epoxy liquids.
  • Avoid cleaning silicone molds with alcohol and solvent-based products, and be careful not to touch the mold with your fingers.