8-Cup Tray - Hobby Silicone Mold SN25 - Code:

Our silicone molds are reusable, not for one-time use resin molds. Resin epoxy molds, which can be used in many fields, can create differences in many sectors depending on your imagination.

Usage: Pour 2 parts resin and 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 10 - 15 minutes from right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and edges of the container to ensure a homogeneous mixture. After that, let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will become touchable after about 6 hours and completely hardened within 24 hours. It will reach a glass state in 48 hours.

Color: Transparent

• Important note:

  • The general lifespan of a mold is usually 10 uses, but some of our mold models can be used 20-25 times.
  • Taking good care of your mold and following proper cleaning procedures can extend its lifespan.
  • We recommend using mold release spray, which preserves the shine of the mold and ensures a longer lifespan.
  • Non-alcohol-based wet wipes are the most effective in cleaning epoxy residues.
  • Avoid cleaning silicone molds with alcohol or solvent-based products and do not touch the mold with your fingers.