Multiple Crystal Epoxy and Candle Silicone Mold - Code: 401

Resin epoxy silicone injection molds are heat resistant and easy to release, meaning they can be removed after the product has dried, and can withstand high temperatures in a range of approximately 200 to 300 degrees Celsius, providing a quick curing for resin epoxy castings.

Our silicone molds are reusable and not for one-time use resin molds. Resin epoxy molds can be used in many different areas, creating various differences in different sectors based on your imagination.

Usage: Pour 2 parts resin into 1 part freezer-safe container and mix slowly until no air bubbles remain. Mix thoroughly from right to left, left to right, and bottom to top for about 10 - 15 minutes. During mixing, make sure the mixing stick touches the bottom and sides of the container to ensure a homogeneous mixture.
Then let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It becomes touchable in about 6 hours. It completely hardens within 24 hours. It takes on a glass-like appearance in 48 hours.

Color: Transparent

• Important Note:

  • The general lifespan of the mold is 10 uses, while some of our model molds can be used between 20-25 times.
  • Taking good care of your mold and following proper usage and cleaning procedures can help you extend its lifespan.
  • We recommend using mold release spray, as it helps maintain the gloss of the mold and prolong its lifespan.
  • Non-alcohol-based wet wipes are the most effective for cleaning epoxy residues and liquids.
  • Absolutely do not clean silicone molds with alcohol or solvent-based products, and be careful not to touch the mold with your fingers.