3 EYED EPOXY PAINT POURING SILICONE CUP - Code:1161

Important warning:
The general lifespan of molds is usually around 10 times, but in some models, it can be 20-25 times.
Taking good care of your mold and following proper usage and cleaning procedures can help prolong its lifespan.
We recommend using mold release spray, as this product or wax varnish maintains the glossiness of the mold and ensures a longer lifespan.
Non-alcohol-based wet wipes are the most effective material for cleaning epoxy residues.
Do not clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.

Epoxy resin silicone injection molds are heat-resistant and easily removable molds that can withstand temperatures between 200 and 300 degrees Celsius, allowing for quick drying of resin epoxy casts.

Our silicone molds are reusable and not for single-use resin molds. Resin epoxy molds can create variety in many sectors based on your imagination.
Usage: Pour 2 parts resin to 1 part hardener into a freezer-safe container and mix slowly until no air bubbles remain. Mix thoroughly in a back-and-forth, side-to-side, and up-and-down motion for 10-15 minutes. Ensure a homogeneous mixture by scraping the sides and bottom of the container with the mixing stick.
Let the mixture rest for 5 minutes, then pour it into the mold and let it dry.
It will become touch-dry in about 6 hours and completely harden within 24 hours.
It will reach a glass-like state within 48 hours.