Crystal Prism Model Silicone Resin Epoxy Mold - Large Size - Code: 54

Crystal Model Silicone Resin Epoxy Mold - Large Size - 54

Finished product height 2.4cm

Resin epoxy silicone injection molds are heat-resistant and easy to release, meaning they can be removed after the product has dried. These molds are resin epoxy molds that allow quick drying in resin epoxy pours, with a high heat resistance, able to withstand temperatures between approximately 200 to 300 degrees Celsius. Our silicone molds are also reusable, non-disposable resin molds. With a wide range of uses, resin epoxy molds can create differences in many sectors depending on your imagination. Currently, we have more than 600 resin epoxy mold models available in Turkey.

Instructions: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes from right to left, left to right, and bottom to top. The mixing stick should touch the bottom and sides of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and leave it to dry. It will be touchable after approximately 6 hours and completely hardened within 12 hours. It will achieve a scratch-resistant glass-like finish in 48 hours.

Color: Transparent

Product Code: GJ002-big

• • The general service life of the mold is usually 10 uses, while some model molds can be used up to 20-25 times.
  • Taking good care of your mold and following proper usage and cleaning procedures can prolong its lifespan.
  • We recommend using mold release spray, as it maintains the luster of the mold and ensures a longer lifespan.
  • Non-alcohol-based wet wipes are the most effective way to clean epoxy residues from silicone molds.
  • Avoid cleaning silicone molds with alcohol or solvent-based products and do not touch the mold with your fingers.