Epoxy Resin Silicone Mold - Multi Jewelry Mold - 125

Epoxy Resin Mold - Jewelry Mold - 9.5 x 11.5 cm

Epoxy resin silicone injection molds are heat resistant and easy to release, meaning they can be removed from the product after it has dried. These molds maintain a high heat degree, typically between 200 and 300 degrees, in a hot environment, allowing for quick drying of resin epoxy pours. Additionally, our silicone molds are reusable and not for one-time use. Epoxy resin molds can be used in various fields and can create differences in many sectors depending on your imagination.

Usage: Epoxy resin is poured into a container and mixed slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes, alternating from right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Then, let the mixture sit for 5 minutes, pour it into the mold, and let it dry. It becomes touchable after approximately 6 hours and completely hardens within 12 hours. It takes on a scratch-resistant glass-like appearance after 48 hours.

Color: Transparent

• Important notice:

  • Taking good care of your mold and following proper usage and cleaning procedures can help prolong its lifespan.
  • Non-alcohol-based wet wipes are the most effective material for cleaning epoxy liquids.
  • Avoid cleaning silicone molds with alcohol- or solvent-based products, and make sure not to touch the mold with your fingers.