Necklace and Earring Resin Epoxy Mold -Code:367

Resin Epoxy Mold for Necklace and Earrings - 4.6 x 1.8 cm

Epoxy resin silicone injection molds are heat-resistant and easy-to-release molds that can withstand high temperatures, typically between 200 to 300 degrees Celsius, allowing for quick drying of resin epoxy casts that can be removed after the product has dried. Our silicone molds are reusable and not for one-time use. Resin epoxy molds can be used in many areas and can create differences in various sectors depending on your imagination. Currently, we have more than 600 resin epoxy mold models in Turkey.

Instructions: Pour 2 parts resin and 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes by stirring from right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable after about 6 hours and completely hardens within 12 hours. It achieves a scratch-resistant glass-like finish in 48 hours. Color: Transparent

Product Code: W0069

• Important Warning:

  • The general lifespan of a mold is usually 10 uses, while some of our mold models can be used for 20-25 times.
  • Taking good care of your mold and following proper usage and cleaning procedures can help prolong its lifespan.
  • We recommend using mold release spray or wax varnish to maintain mold shine and ensure a longer lifespan.
  • Non-alcohol-based wet wipes are the most effective for cleaning epoxy residues.
  • Do not clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.