Resin Epoxy Mold - Wavy Round -Code:74

Wavy Round Pendant Resin Epoxy Mold - 3.3 cm

Resin epoxy silicone injection molds are heat-resistant and easy to remove, meaning they can be removed after the product has dried, providing a quick drying process for resin epoxy casts that can withstand high temperatures ranging from approximately 200 to 300 degrees in a hot environment. Our silicone molds are also reusable, non-disposable resin molds that can be used multiple times. Resin epoxy molds can be used in various fields and can create differences in many sectors depending on your imagination. Currently, we have more than 600 resin epoxy mold models available in Turkey.

Usage: Pour 2 parts resin to 1 part hardener into a container and stir slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes from right to left, left to right, and bottom to top. The mixing stick should create a homogeneous mixture touching the bottom and sides of the container. Then, let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It will become touchable after approximately 6 hours and completely harden within 12 hours. After 48 hours, it will acquire a scratch-resistant glass-like appearance. Color: Transparent

Product Code: W0072

Important note:

• The general lifespan of the mold is usually 10 uses, but some of our mold models can be used up to 20-25 times.
• Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
• We recommend using mold release spray or wax varnish to maintain the mold's gloss and ensure a longer lifespan.
• Non-alcohol-based wet wipes are the most effective for cleaning epoxy liquids from silicone molds.
• Avoid cleaning silicone molds with alcohol or solvent-based products, and refrain from touching the mold with your fingers.