Four-Heart Magnet Resin Epoxy Mold - CM4

Four-Heart Resin Epoxy Mold (Measurement of One Heart: 7 cm)

• Resin epoxy silicone injection molds are heat-resistant and easily removable molds that can withstand temperatures between approximately 200 to 300 degrees Celsius, allowing for quick curing of resin epoxy pours and easy removal of the product after it has dried.

• Our silicone molds are reusable and not for one-time use only. Resin epoxy molds can be used in various fields and can create differences in many sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until there are no air bubbles left. Stir the mixture thoroughly for 10 - 15 minutes in a back and forth, up and down motion to ensure a homogeneous mixture touching the bottom and sides of the container. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable in about 6 hours and completely hardens within 24 hours. It achieves a glass-like state within 48 hours.

• Color: Transparent

• • Important Note:

    • The general lifespan of a mold is 10 uses, while some of our model molds can be used between 20-25 times.
    • Taking good care of your mold and following proper cleaning procedures can help prolong its lifespan.
    • We recommend using mold release spray or wax varnish to maintain the gloss of the mold and ensure a longer lifespan.
    • Non-alcohol-based wet wipes are the most effective for cleaning epoxy liquids.
    • Avoid cleaning silicone molds with alcohol or solvent-based products and refrain from touching the mold with your fingers.